Description
The KF-9080W wet blasting cabinet circulates an abrasive and water slurry through a hand-held gun for component cleaning and finishing.
Technical specifications
| Model | KF-9080W |
|---|---|
| Process | Manual wet abrasive blasting |
| Slurry system volume | 25 L |
| Pump motor | 2.2 kW |
| Blast gun | One wet blast gun with 8 mm boron carbide nozzle |
| Airflow reference | 0.5–1.1 m³/min; nozzle pressure to be confirmed |
| Lighting | Two 18 W lamps |
| External dimensions | 1000 × 1200 × 2000 mm |
| Usable chamber size | Supplier lists conflicting chamber depths; approved drawing required |
| Abrasive and water | Manufacturer reference ratio 1:3; media selected for the workpiece |
| Electrical installation requirements | Supply voltage, phase, frequency, circuit protection and connection are not verified for this model. Confirm the motor and control nameplates against the Australian site supply before order. |
Applications
Workshops processing compatible aluminium, stainless steel and other metal components after media trials.
Equipment scope
One blue wet blast cabinet with its pictured pump and controls. Compressor, media and water treatment are separately specified. Guarding, emergency stops, operating instructions, commissioning tests and Australian site requirements must be resolved before supply.
Quotation and support
Send the operating duty, site power supply and Australian delivery postcode. The written quotation confirms the fixed configuration, delivery and commissioning scope, acceptance criteria, lead time and warranty.