Description
The MH-II drum abrasion tester rotates aggregate and a specified steel-ball charge to assess resistance to abrasion and fragmentation.
Technical specifications
| Model | MH-II |
|---|---|
| Drum internal diameter | 710 ±5 mm |
| Drum internal length | 510 ±5 mm |
| Drum speed | 30–33 rpm |
| Counter setting range | 1–9999 revolutions |
| Motor power | 1.1 kW |
| Source supply | 380 V, 50 Hz |
| Steel ball set listed | 12 balls, 416.6 g each, 48 mm diameter |
| Dimensions | 1320 × 980 × 1050 mm |
| Electrical installation requirements | The source electrical rating is stated separately above. Compatibility with the Australian site supply, phase, frequency, circuit protection and connection must be confirmed for this model before order. |
Applications
Quarries, aggregate suppliers and construction-material laboratories using a validated procedure.
Equipment scope
One drum tester and listed ball set. Charge mass, drum shelf and safety enclosure must be checked against the intended method. Guarding, calibration or duty testing, electrical documents and Australian site requirements must be confirmed before supply.
Quotation and support
Send the operating duty, site power supply and Australian delivery postcode. The written quotation confirms the fixed configuration, delivery and commissioning scope, acceptance criteria, lead time and warranty.