VML-1 Electronic Refrigerant Leak Detector
- SKU:
- MTR-MIC-158
- Shipping:
- Free Shipping
Description
VML-1 Electronic Refrigerant Leak Detector is a business-grade test and maintenance product selected for Australian industrial, building-services and technical-service applications.
Key specifications
| Model | VML-1 |
|---|---|
| Detection method | Negative-corona electronic sensing |
| Refrigerants | CFC, HCFC and HFC families |
| Stated sensitivity | ≤3 g/year for R134a |
| Flexible probe | Approx. 400 mm |
| Battery life | At least 8 hours stated |
| Operating temperature | 0 to 40°C |
| Dimensions | Approx. 190 × 65 × 40 mm |
| Approx. weight | 350 g |
| Listed sales unit | 1 detector kit |
| Minimum order | 1 listed sales unit |
Typical applications
- HVAC service leak investigation
- Refrigeration commissioning
- Preventive maintenance of refrigerant systems
Selection and ordering notes
- Verify compatibility with the exact refrigerant and the sensitivity required by the job.
- Electronic indication should be followed by the approved confirmation method for the site.
- Refrigerant work in Australia must be performed by appropriately authorised personnel.
Product appearance and supplied accessories may vary with the confirmed configuration. Final technical requirements are checked against the approved order specification before supply.
Related Products
Related Products
Digital Concrete Crack Width Detector with Integrated Display
$2,939.95
Digital Concrete Crack Width Detector with Integrated DisplayAn integrated optical crack-width inspection instrument for magnified on-site viewing, measurement and documentation of fine surface...
1-1/8 in Two-Hole Flange Alignment Pin Set – Black, 2 Piece
$29.95
Set up and level two-hole pipe flanges faster during fabrication, fit-up and maintenance. This compact two-piece alignment-pin set locates through opposing flange bolt holes to help hold the flange...
DHY-200 3-in-1 Hydraulic Busbar Processing Machine
$3,999.00
Integrated cutting, punching and bending for copper and aluminium busbarThe DHY-200 combines three hydraulic workstations in one mobile workshop platform to cut, punch and bend copper or aluminium...
YINHAI 12 1/4 in IADC 537 TCI Tricone Drill Bit
$9,359.00
YINHAI 12 1/4 in IADC 537 TCI Tricone Drill BitSpecified as a fixed model for Australian commercial, agricultural, quarrying or mineral-processing buyers. This listing is supplied to order so...
2S250-25 1 in Stainless Solenoid Valve 24V DC Normally Closed
$239.00
2S250-25 1-inch stainless 24V DC solenoid valve A direct/servo-assisted two-way normally closed solenoid valve for automated control of compatible water, air, light oil and inert-gas services. This...