Description
The XCM-9-W is a water-based mould temperature controller with a 9 kW heater and 0.75 kW circulating pump for process temperature management.
Technical specifications
| Model | XCM-9-W |
|---|---|
| Heat-transfer medium | Water |
| Heating power | 9 kW |
| Pump motor power | 0.75 kW |
| Manufacturer-listed pump flow | 135 L/min; duty point requires confirmation |
| Manufacturer-listed pump head | 25 m; not a simultaneous guaranteed duty point with maximum flow |
| Standard water temperature rating | Up to 95 °C; high-temperature variant excluded |
| Mould connections | 3/8 in, 4 × 2 arrangement; thread standard to be confirmed |
| Overall dimensions (L × W × H) | 680 × 350 × 780 mm |
| Listed equipment mass | 90 kg |
| Australian electrical build for quotation | 415 V, three phase, 50 Hz requested; manufacturer confirmation required |
Applications
Injection-moulding and compatible production processes requiring controlled circulating-water heating. Confirm process heat load, mould pressure limit, connection layout and available cooling-water services.
Equipment scope
One XCM-9-W water temperature-control unit as pictured. This fixed selection excludes the oil-medium and 120 °C variants. Hoses, water services, protection devices and electrical configuration are specified in the quotation.
Quotation and support
Send the operating duty, site power supply and Australian delivery postcode. The written quotation confirms the fixed configuration, delivery and commissioning scope, acceptance criteria, lead time and warranty.