Description
The XGB-200-4 weighs and mixes four resin components in controlled batches.
Technical specifications
| Model | XGB-200-4 |
|---|---|
| Components | 4 |
| Nominal mixing rate | 200 kg/hour |
| Batch mass | 3.5 kg |
| Main-material dosing range | 5–100% |
| Additive dosing range | 0.5–10% |
| Main hopper volume | 32 L |
| Additive hopper volume | 12 L |
| Mixing chamber volume | 10 L |
| Listed electrical supply | 230 V single phase, 50 Hz |
| Total power | 0.25 kW |
| Compressed air | Approximately 0.59–0.78 MPa (6–8 kgf/cm² source) |
| Floor-mounted mass | 155 kg |
| Dimensional reference | 1745 mm high × 825 mm wide × 750 mm deep |
| Electrical installation requirements | The source electrical rating is stated separately above. Compatibility with the Australian site supply, phase, frequency, circuit protection and connection must be confirmed for this model before order. |
Applications
Injection-moulding and extrusion operations blending resin, masterbatch and compatible additives.
Equipment scope
One blender with the black floor stand shown. Dosing performance requires calibration with the intended materials. Final drawings, duty testing, material compatibility and Australian site requirements must be approved before supply.
Quotation and support
Send the operating duty, site power supply and Australian delivery postcode. The written quotation confirms the fixed configuration, delivery and commissioning scope, acceptance criteria, lead time and warranty.