3/16 in (4.75 mm) Handheld Brake Line Double Flaring Tool – 45° SAE

Form 45-degree double flares on 3/16 in (4.75 mm) brake tubing without removing the complete line from the vehicle. This compact handheld flaring tool is designed for in-situ repair work where bench-mounted flaring bars are difficult to position.

Key features

• Dedicated 3/16 in / 4.75 mm tube size for consistent clamping
• Creates 45° SAE double flares
• Compact 150 mm body for confined under-vehicle and engine-bay access
• Separate forming adaptor included
• High-carbon-steel tool body with a knurled blue handle
• Suitable for compatible copper and aluminium tubing

Specifications

Important compatibility information

This model is specifically listed for 3/16 in (4.75 mm) tubing and a 45° SAE double flare. It is not advertised as a universal multi-size kit. Check the vehicle manufacturer's flare profile, tube material and service procedure before use. Do not assume compatibility with DIN/ISO bubble flares or other diameters.

Professional-use note

Brake lines are safety-critical. Tube ends must be cut square, deburred and inspected after forming. A damaged, cracked, uneven or incorrect flare must not be installed. Installation and final leak/pressure testing should be performed by a suitably qualified person in accordance with the vehicle manufacturer's procedure and applicable Australian requirements.

Specifications are based on the supplier's listing and the ordered 99205 model. Matrico performs model verification and a pre-dispatch visual check. For trade quantities or compatibility questions, use the single Request a Quote button on this page.