Description
The G35-1 uses a single helical rotor and elastomer stator to transfer compatible viscous liquids.
Technical specifications
| Model | G35-1 |
|---|---|
| Reference flow | 3.25 m³/hour |
| Differential pressure reference | 0.6 MPa |
| Reference speed | 579 rpm |
| Motor rating | 1.5 kW |
| Inlet / outlet | 65 / 50 mm |
| Pump body | HT200 cast iron |
| Rotor | 2Cr13 stainless steel |
| Stator | NBR |
| Seal | Mechanical seal |
| Electrical installation requirements | Supply voltage, phase, frequency, circuit protection and connection are not verified for this model. Confirm the motor and control nameplates against the Australian site supply before order. |
Applications
Industrial sludge and process-liquid transfer with a verified elastomer compatibility and duty cycle.
Equipment scope
One pump, motor, coupling guard and base as pictured. Dry-run protection, relief and final coupling alignment must be specified. Final drawings, duty testing, material compatibility and Australian site requirements must be approved before supply.
Quotation and support
Send the operating duty, site power supply and Australian delivery postcode. The written quotation confirms the fixed configuration, delivery and commissioning scope, acceptance criteria, lead time and warranty.