Description
A digital Brinell hardness tester with motorised force application and optical indentation measurement.
Technical specifications
| Model | HBS-3000 |
|---|---|
| Test forces | 62.5, 100, 125, 187.5, 250, 500, 750, 1000, 1500 and 3000 kgf |
| Listed measuring range | 8–650 HBW |
| Reading microscope | 20× magnification |
| Microscope division | 1.25 µm |
| Maximum specimen height | 220 mm |
| Listed specimen width clearance | 135 mm |
| Load application | Electronic motorised loading with force feedback |
| Data output | Built-in printer and RS232 |
| Ball indenter sizes | 2.5, 5 and 10 mm |
| Net mass | 130 kg |
| Source electrical supply | 220 V AC, single phase, 50/60 Hz; Australian compatibility to be confirmed |
Applications
Foundries, forging businesses and metal quality-control laboratories. Confirm material, specimen geometry, calibration range and test method before procurement.
Equipment scope
One HBS-3000 tester with three ball indenters, large, small and V tables, two hardness blocks and 20× reading microscope. Traceable calibration is specified in the quotation.
Quotation and support
Send the operating duty, site power supply and Australian delivery postcode. The written quotation confirms the fixed configuration, delivery and commissioning scope, acceptance criteria, lead time and warranty.