Description
The JB-300B pendulum impact tester measures the energy absorbed by a notched metal specimen during an impact test.
Technical specifications
| Model | JB-300B |
|---|---|
| Pendulum energies | 150 J and 300 J, two pendulums listed |
| Pendulum shaft to impact point | 750 mm |
| Impact speed | 5.2 m/s |
| Initial rise angle | 150° |
| Specimen support span | 40 +0.2 mm, source tolerance |
| Standard specimen | 10 × 10 × 55 mm |
| Dimensions | 2124 × 600 × 1340 mm |
| Net mass | 450 kg |
| Source power supply | 380 V, three phase, 50 Hz |
| Electrical installation requirements | The source electrical rating is stated separately above. Compatibility with the Australian site supply, phase, frequency, circuit protection and connection must be confirmed for this model before order. |
Applications
Metal fabrication, foundries and materials laboratories validating an agreed test method.
Equipment scope
One dial-indicating tester with the pictured red mesh guards and the specified two-pendulum set. Striker radius, fixtures, interlocks and calibration must be fixed in the quotation. Guarding, calibration or duty testing, electrical documents and Australian site requirements must be confirmed before supply.
Quotation and support
Send the operating duty, site power supply and Australian delivery postcode. The written quotation confirms the fixed configuration, delivery and commissioning scope, acceptance criteria, lead time and warranty.