Description
A compact robotic carton palletising station with suction gripper, control cabinet and short infeed conveyor.
Technical specifications
| Model | LT-MD30G |
|---|---|
| Robot load rating | 30 kg; usable carton payload depends on gripper |
| Working radius | 1900 mm |
| Maximum palletising height | 2100 mm |
| Nominal rate | 8–10 picks/min; cycle dependent |
| Maximum power consumption | 3 kW |
| Source power supply | 220 V, single phase, 50 Hz |
| Machine-body footprint | 1505 × 1716 mm |
| Operating footprint | 3150 × 1716 mm |
| Minimum ceiling height | 3.1 m |
| Listed equipment mass | Approximately 350 kg |
| Communication | TCP/IP |
| Australian electrical build | 230–240 V, single phase, 50 Hz; written confirmation required before order |
Applications
Manufacturers and contract packers stacking repeat carton loads. Confirm carton rigidity, centre of gravity, pallet pattern and line cycle time.
Equipment scope
One LT-MD30G station with pictured suction gripper, base and short infeed conveyor. Pallets, cartons and site guarding are defined separately in the installation scope.
Quotation and support
Send the operating duty, site power supply and Australian delivery postcode. The written quotation confirms the fixed configuration, delivery and commissioning scope, acceptance criteria, lead time and warranty.