Megger
Megger MIT1025/2-AU 10 kV Insulation Resistance Tester
- SKU:
- MTR-WE-060
- MPN:
- MIT1025/2-AU
- Shipping:
- Free Shipping
Description
Megger MIT1025/2-AU 10 kV Insulation Resistance Tester
The Megger MIT1025/2-AU is a 10 kV insulation resistance tester for qualified electrical testing of assets such as motors, transformers, switchgear and cables. Its diagnostic modes and stored results can support wind farm electrical maintenance and commissioning programmes.
Technical specifications and selection
| Manufacturer | Megger |
|---|---|
| Model | MIT1025/2-AU, Advanced range |
| Australian order-code reference | 1016-097 in the manufacturer catalogue |
| Preset test voltages | 500 V, 1,000 V, 2,500 V, 5,000 V and 10,000 V |
| Maximum test voltage | 10 kV |
| Digital resistance range | 10 kΩ to 20 TΩ; accuracy depends on voltage and measured resistance |
| Test functions | IR, timed IR, DAR, PI, step voltage, DD and ramp; PDC requires the appropriate software |
| Noise immunity | 6 mA from 960 V to 10 kV |
| Charging current selection | 1 mA or 3 mA; 6 mA operation requires mains power |
| Typical battery operating time | 4.5 hours at 10 kV with a 100 MΩ load |
| AC input | 90–264 V, 47–63 Hz |
| Operating temperature | −20°C to +50°C |
| Enclosure protection | IP65 with lid closed; IP40 with lid open |
| Safety-category reference | CAT IV 600 V up to 3,000 m altitude |
| Dimensions and mass | 315 × 285 × 181 mm; 4.5 kg |
| Data connection | USB; wireless configuration and software package to be confirmed |
Applications and selection
For isolated and discharged equipment tested under an approved procedure. The 10 kV output rating is a test capability, not the voltage that should be applied to every asset. Select the test voltage, leads and method for the equipment insulation system and its service history.
Information for your quotation
Provide the assets to be tested, required test voltage and functions, lead lengths, Australian supply requirements and calibration needs. Specify the current /2 model and whether wireless functionality, reporting software and accessories are required.
The quotation defines the selected configuration, included items and order quantity.
Related Products
Related Products
JH3302 10 kV Digital Insulation Resistance Tester
JH1006B 200 A Contact and Loop Resistance Tester
SGBB-10A Three-Phase Transformer Turns Ratio Tester
AR-132C Portable Surface Roughness Tester, Ra and Rz
