Description
UNI-T UT219DS 600 A AC/DC True RMS Clamp Meter
The UNI-T UT219DS is a 600 A AC/DC true RMS clamp meter for professional electrical maintenance. The DS model includes a dual display, simultaneous voltage and current display, and a low-pass filter for appropriately selected motor-drive measurements.
Technical specifications
| Manufacturer / model | UNI-T / UT219DS |
|---|---|
| AC / DC current range | Up to 600 A |
| Basic current accuracy | ±(1.8% + 6 digits), subject to range and measurement conditions |
| AC / DC voltage range | Up to 1000 V; observe the measurement-category limits |
| Measurement category | CAT IV 600 V / CAT III 1000 V, with suitable rated leads and accessories |
| Jaw opening | 33 mm |
| Display | 6000 counts; dual LCD |
| AC current frequency response | 40–400 Hz |
| AC voltage frequency response | 40 Hz–1 kHz |
| Low-pass filter | 1 kHz, 3 dB attenuation |
| Additional functions | Resistance, capacitance, frequency, diode and temperature measurement; motor sequence test |
| Protection | IP54 |
| Power supply | 3 Ă— 1.5 V R03 / AAA batteries |
| Dimensions / weight | 234.6 Ă— 82 Ă— 47 mm; approximately 310 g |
Application and selection
For wind farm electrical maintenance, the meter can support selected checks on auxiliary supplies, motors and control-related circuits within its ratings. The DS configuration measures both AC and DC current; other UT219 models have different functions.
The test location, voltage, transients, leads and accessories must all match the required measurement category. Specify the actual temperature probe if temperature testing is required, because probe limits can be lower than the meter's display range. Use by qualified personnel under the site's electrical work procedures is required.
Information for your quotation
- Required quantity and intended circuit or motor application
- Expected AC/DC current, voltage and measurement category
- Test-lead, temperature-probe and calibration requirements
- Delivery postcode, project timing and required documentation
The application photo illustrates a manufacturer measurement setup. Confirm the supplied leads, temperature probe, batteries and carrying bag in the quotation.
Supply availability, included items, price, freight, lead time and warranty arrangements are confirmed in the written quotation for the selected configuration.
Related Products
Related Products
UNI-T UT315A Portable Vibration Meter
UNI-T
TUF-2000B Clamp-On Ultrasonic HVAC Heat and BTU Meter
Handheld Digital Gaussmeter for AC/DC Magnetic Fields
LEFOO 24V DC Stepper Peristaltic Dosing Pump 600–3000 mL/min
LEM HAT 1000-S 1000 A AC/DC Current Transducer
LEM
