Description
The XCD-80H is a cabinet-style honeycomb rotor dehumidifier supplying process air at a listed flow of 80 m³/h for plastics drying systems.
Technical specifications
| Model | XCD-80H (XC-D80H in technical table) |
|---|---|
| Dehumidification method | Honeycomb rotor |
| Process airflow | 80 m³/h |
| Process blower power | 0.75 kW |
| Regeneration blower power | 0.25 kW |
| Regeneration heater power | 3.5 kW |
| Process duct connection | 2.5 in nominal; connection drawing required |
| Cooling-water connection | 3/4 in nominal; thread standard to be confirmed |
| Model-table dimensions (D × W × H) | 710 × 560 × 1670 mm |
| Model-table equipment mass | 120 kg |
| Source electrical supply | 400 V, three phase, 50 Hz |
| Australian site compatibility | Site voltage tolerance, protection and wiring require manufacturer and installer confirmation |
Applications
Plastic processors integrating dry-air generation with a suitable drying hopper. Resin type, throughput, moisture target, process temperature and ambient conditions determine the required system design.
Equipment scope
One XCD-80H dehumidifier cabinet with process and regeneration blowers. A drying hopper and conveying system are not included in this selection. Ducting, cooling-water services, dew-point acceptance and installation scope are fixed in the quotation.
Quotation and support
Send the operating duty, site power supply and Australian delivery postcode. The written quotation confirms the fixed configuration, delivery and commissioning scope, acceptance criteria, lead time and warranty.